Aerial Aerocube VT2 Series Instrukcja obsługi - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Osuszacz powietrza Aerial Aerocube VT2 Series. Aerial Aerocube VT2 Series 20 stron. Water separator
Drukuj stronę
Drain residual water
Fig. 6: AERIAL water separator VT2, drain plug for residual water
1
Drain plug for residual water
In case of longer periods without operation the residual water in the device must
be discharged. To do so turn out the drain plug (s. fig. 6, item 1). Tilt and move the
housing to and fro so that the residual water can flow out.
Clean coarse filter
Fig. 7: Filter box with filter grille
1, 3
Knurled nuts
2
Filter grille
Release tension locks (s. Fig. 1, item 4) and open cover.
Release knurled nuts; remove and clean filter grille.
Remove fluff, insulation material particles and fibres from the inside of the box.
Insert filter grille, tighten knurled nuts, close cover, tighten tension locks.
MAINTENANCE AND SERVICE
Fig. 8:Filter grille removed
1
Intake openings
2
Filter box inside
Page 11 of 15