Arrakis Systems ARC BLUETOOTH Instrukcje operacyjne

Przeglądaj online lub pobierz pdf Instrukcje operacyjne dla Mikser muzyczny Arrakis Systems ARC BLUETOOTH. Arrakis Systems ARC BLUETOOTH 8 stron.

Congratulations on your purchase of an ARC series console. One possible feature with your

console is the Bluetooth channel. This section of the manual will assist with the operation of

the Bluetooth feature.

Bluetooth is an optional feature for the ARC series consoles (ARC-10 series & ARC-15). The Part

number in the order will specify 'blue' at the end, if you have purchased a Bluetooth version. For

example, the ARC-10BP-blue has Bluetooth, but the ARC-10BP does not.

On your ARC series console, you will

notice your Bluetooth controls on the

left side of the meter panel. The

antenna is located on the top, and

there are 2 buttons with specific tasks.

Bluetooth audio will play out the

Bluetooth channel (CH 10 for ARC-10,

CH 15 for ARC-15). This is the phone

hybrid channel, and may alternatively

be used with your phone hybrid. The

phone and Bluetooth audio sums into

this channel.

Operational Instructions:

HOW TO PAIR

To connect your cell phone, tablet, or Bluetooth device to the console:

1. Power up your ARC console. If already powered on, then leave the console on.

2. Press and hold the green Call button for exactly 5 seconds, and then release.

You will hear a beep on the Bluetooth channel.

3. You will notice the red Drop button will now blink on your console. This means it

is ready to connect. In your cell phone, tablet, or other device, turn on the

Bluetooth option. You will have 10 minutes to pair. After the 10 minutes, it will

still flash, but you will need to start back at step 1 to pair.

4. In your device settings, select Search for devices. This step is different

depending on the device you are connecting.

5. Your device should find ARRAKIS 1.X (X = the firmware version). Select to

connect.

6. Now that your device is paired, the red Drop button should now be constant lit.

7. After your device is paired, you will only need to reconnect within your device. It

is as simple as finding the Bluetooth device and select the option to Connect.

Revision 1.0.2

Jan 16, 2014

Firmware version: Arrakis 1.1