displayit Graffiti:Plus Wall - Kit A Instrukcja montażu
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Monitor displayit Graffiti:Plus Wall - Kit A. displayit Graffiti:Plus Wall - Kit A 5 stron. 10’ x 10’ inline display kit
Drukuj stronę1. Set the frame standing on end. Grasp
two of the middle hubs (circled in
orange) and gently expand the frame.
Note the location of the adjustable feet
for future reference.
3-piece channel bars
Corner Hub
4A. Slide one end of the first channel
bar onto the connection point of one
of the corner hubs. The triangular
channel bar's thinner edge goes
toward the inside of the frame.
displayit.com
Adjustable Feet
2. Snap all frame locks (marked
in red in the diagrams below) to
secure the frame.
It is recommended to assemble
the frame with it laying on its back.
2.5 Foot Frame
1-piece channel bars
Thinner Edge
4B. Snap the slots in the back of the
channel bar onto the nubs on the hubs.
800.207.0311
Frame Lock
Snap
3-piece channel bars
Slot
Nub
After-Hours Emergency: Call or Text 678.723.5343
10' x 10' Inline Display Kit A
Assembly Instructions
3-piece channel bar
3. Unfold and slip together each
bungeed channel bar.
8 Foot Frame
3-piece channel bars
4C. Attach the other end of the
channel bar to the other corner hub.
Repeat steps 4A-4C for all channel
bars as seen in the diagrams above.
Gra ti:Plus V.2 Updated 10/10/2019
1