3D Systems ProJet 4500 Podręcznik przetwarzania końcowego - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik przetwarzania końcowego dla Drukarki 3D 3D Systems ProJet 4500. 3D Systems ProJet 4500 13 stron. 3d professional printer
Również dla 3D Systems ProJet 4500: Skrócona instrukcja obsługi (19 strony)
Drukuj stronę
3 .
Use an external source of high pressure air to blow off dust from brushing .
•
It is not recommended to use high pressure air to dust fine features. This increases the risk of breaking. If you decide to
blow off a part with fine features do your best to only blow off the larger features; avoid fine features.
•
DO NOT
use the air wand from the printer's cleaning station to dust . This will contaminate the core powder in the ma-
chine .
3D Systems, Inc.
Blow any dust off with external compressed air
7