3D Systems ProJet 5500X Skrócona instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Drukarki 3D 3D Systems ProJet 5500X. 3D Systems ProJet 5500X 13 stron.

8/11/22, 10:07 AM

3. The adjacent view shows the bottom of the

of the platform is placed toward the front of the printer.

4. Place the

platform

the rear brackets.

5. Slide the platform toward the rear of the printer until it is rmly pressed against the rear

brackets. Press down on the platform at the points indicated to make certain the platform is

"seated" onto the X-carriage.

. Close the front door and press the

infocenter.3dsystems.com/projetmjp5500x/print/book/export/html/966

on the

X-carriage

so the rear edge of the platform is positioned in front of

Start

key on the touchscreen to bring the printer on-line.

Quick Start Guide

platform. The recessed area on the bottom

7/13