3D Systems ProJet 6000 Instrukcja pracy
Przeglądaj online lub pobierz pdf Instrukcja pracy dla Drukarki 3D 3D Systems ProJet 6000. 3D Systems ProJet 6000 7 stron. Manual resin stirring procedure
Drukuj stronę
Title: Work Instruction – ProJet 6000/7000 Manual Resin Stirring Procedure
Doc: 283584-00
Rev: A
Purpose: To provide step-by-step work instructions for manually stirring the vat in the ProJet 6000 and
7000 printers.
Tools & Supplies Required:
• Nitrile gloves
• Safety goggles
• Lab coat
• Absorbent paper towels
• 3/8" to 1/2" variable-speed drill (cord or cordless) which can operate to stir resin for at least 30
minutes.
• A propeller which has a long shaft stem and can be attached to the drill for mixing. The total length
of the propeller should not be longer than 6" (15cm).
3D SYSTEMS CONFIDENTIAL
Description: ProJet 6000 and 7000
Date: 9/11/14
Example propeller
Page: 1 of 7