Displays2go ECOSOC1117 Instrukcja montażu - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Stojaki i stojaki Displays2go ECOSOC1117. Displays2go ECOSOC1117 5 stron. Eco cork standoff signage

Drukuj stronę

1. Place your acrylic signage against the wall and make sure the signage is level on the wall.

Hold the signage and mark the the center of each hole on the wall. Remove the acrylic

signage and drill holes at the marked locations.

2. Insert wall anchors into drilled holes and gently tap each anchor into the wall with a

hammer until it's flush with the wall. Attach the cork backer to the wall and use anchor

screws to fix standoff bases.

Wall Mounting