Displays2go WL3SDSG Instrukcja montażu - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Stojaki i stojaki Displays2go WL3SDSG. Displays2go WL3SDSG 5 stron. Triangle booth display with custom graphics
Drukuj stronę4. Unroll one corner panel and secure to the unit in the same way. These will bubble away from
unit slightly, as shown. Repeat for all three corners of the unit.
ASSEMBLING SIGNAGE
1. Carefully remove signage from its packaging. Take care not to
drag the signage on the ground when transferring to the frame.
2. Hang signage from the frame by sliding the notches at the top
onto the hook, as shown. The signage will secure to the frame
magnetically to stay in place. Press gently along the edges of
signage to move into place.
3. Repeat these steps for all the pieces of signage on each side
of your unit.