Displays2go DCRDUVPRNT Instrukcja montażu

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Monitor Displays2go DCRDUVPRNT. Displays2go DCRDUVPRNT 2 stron. Round display unit

Drukuj stronę
ASSEMBLY INSTRUCTIONS
Round Display Unit- DCRDUVPRNT
Open all boxes first and layout all parts on a level and sturdy floor. Reference parts list to verify that all parts
and hardware are present.
Before you begin, read instructions thoroughly prior to assembly. 2 people are required for the installation.
PARTS LIST
Center Panel X1
1. Take the 2 hook side panel and insert into center
panel as shown in images below. Make sure LED light
indent is on top.
2. Take 3 hook side panel and repeat step one.
Rev. 12/18
Top Cap X1
Base X1
DCRDTOP X1
3 Hook Panel X1
3. Slide both side panels down so hooks lock into
place.
4. Pick the assembeled acrylic X by the center panel and
insert into base as shown in the top two images below.
Next take the top cap and insert on to top, as shown in
the two lower images.
2 Hook Panel X1
DCRDUVPRNT X1
1 of 2