Displays2go FRMRCKWT66DS Instrukcja montażu

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Monitor Displays2go FRMRCKWT66DS. Displays2go FRMRCKWT66DS 2 stron. Smablcd - digital screen

ASSEMBLY INSTRUCTIONS

SMABLCD - DIGITAL SCREEN

Open all boxes first and layout all parts on a level and sturdy floor. Reference parts list to verify that all parts

and hardware are present.

Before you begin, read instructions thoroughly prior to assembly. 2 people are required for the installation.

PARTS LIST

Front Panel X1

Back Panel X1

1. Take Screen and insert into brackets making sure

the screen hits the bottom of the brackets shown

below.

2. Next tie the IR cable to the zip tie holder using the

zip tie shown in the images below. Make sure it is

secured tightly.

3. Peel bottom of zip tie holder to stick to front panel

and place IR over hole like the images below.

Rev. 19.10

MASTER SKU: FRMRCKWT66DS

21.5" Screen X1

Screws X6

Spacers X4

4. Remove screw A and replace with screw and

spacer provided in the kit. Repeat steps for screws

B,C, and D. Only screw half way.

5. Remove screw E and replace with a screw from kit.

Repeat step for screw F. Only screw halfway.

Zip tie X1 and Zip tie

holder X1

1 of 2