Abbra Home Control Skrócona instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla System bezpieczeństwa Abbra Home Control. Abbra Home Control 20 stron. For abbra home control; abbra campus; abbralink
Również dla Abbra Home Control: Skrócona instrukcja obsługi (8 strony)
Drukuj stronęStep 2 – Activating the Control Panel
The Control Panel comes with its wall mounting bracket fixed to the back of the unit. Leave
it in place as you follow these instructions. For most homes, there is no need to remove it, as
the Abbra is fully functional if simply placed on a table or desk. If you would like to attach
your Abbra control panel to a wall, this option is explained later in the guide.
Find a central location to place the
Abbra Control Panel that has close
access to a telephone jack and electrical
outlet. Attach end of the wire supplied
with the power wall adapter to the screw
terminals of the power wall adapter.
Connect one end of the power wall
adapter to the socket at the back of the
Abbra Control Panel. Plug the other end
into an electrical outlet. NOTE: Be sure
the electrical outlet is not controlled by a
light switch.
To install the battery, first flip open the
control panel door, exposing the keypad.
Release
the
screw
compartment cover.
to
the
battery