Distech Controls Allure EC-Smart-Air-CH Instrukcja instalacji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria Distech Controls Allure EC-Smart-Air-CH. Distech Controls Allure EC-Smart-Air-CH 10 stron.
Drukuj stronę
Controller Model
ECB-VAV controller
ECL-VAV controller
For the permitted quantities according to the controller model and the connected RJ-45 accessories, see the room calculator spreadsheets available for
download on our website.
ECB-VAV-O
ECB-VAV-N
ECB-VAVS
ECB-VVTS
ECB-103
ECB-203 Series
ECB-VAV-O
ECB-VAV-N
ECB-VAVS
ECB-VVTS
ECB-103
ECB-203 Series
ECY-S1000 Series
ECB-300
ECB-400
ECB-600
ECL-300
ECL-400
ECL-600
Table 1: Maximum Number of Room Devices by Controller Model, and Allowed Addressing Range
Adding devices to the subnetwork decreases the system responsiveness. This may cause a certain delay, which could be an issue for
commands that require fast response, such as lighting and shades/sunblind commands.
The indicated addressing ranges are specific to each group of devices.
4 different Subnet ID codifications are used on the ECx Subnetwork :
£
1 for Allure EC-Smart-Vue Series sensors
£
1 for Allure EC-Smart-Comfort and Allure EC-Smart-Air sensors
£
1 for EC-Multi-Sensors
£
1 for ECx-Light/Blind Series expansion modules
Consequently, an Allure EC-Smart-Vue sensor and an Allure EC-Smart-Air sensor may share the same Subnet ID, but an Allure EC-
Smart-Air sensor and an Allure EC-Smart-Comfort sensor must have a different Subnet ID.
A controller can support a maximum of two (2) Allure Communicating Sensor models equipped with a CO
connected Allure Communicating Sensor models must be without a CO
About the Subnetwork Bus
The controllers use the subnetwork bus to communicate with the room devices (see each controller's datasheet for compatibility), including with the Al-
lure EC-Smart-Air sensors, by using standard structural (Cat 5e) cabling and by connecting the devices in a daisy-chained fashion to the controller's
Subnet Port. For more information, please refer to the table in the --- MISSING LINK --- section of this document.
The maximum length of the Communicating Sensor subnetwork bus is 600 ft (180 m).
Room Devices
Allure EC-Smart-Comfort
Allure EC-Smart-Air
Allure EC-Smart-Vue
EC-Multi-Sensor
Total number of room devices
Allure EC-Smart-Comfort
Allure EC-Smart-Air
Allure EC-Smart-Vue
EC-Multi-Sensor
Total number of room devices
Allure EC-Smart-Comfort
Allure EC-Smart-Air
Allure EC-Smart-Vue
EC-Multi-Sensor
Maximum Number of Room De-
vices
Up to 4
Up to 4
Up to 4
4
4
4
0
12
6
12
0
sensor.
2
Permitted Subnet ID Addressing
Range
1 to 4
1 to 4
1 to 4
-
1 to 4
1 to 4
-
-
1 to 6
1 to 12
-
sensor. Any remaining
2
5 / 10