3D Systems NextDent Cure Instrukcje użytkowania - Strona 3
Przeglądaj online lub pobierz pdf Instrukcje użytkowania dla Sprzęt dentystyczny 3D Systems NextDent Cure. 3D Systems NextDent Cure 4 stron. 3d uv curing unit
Drukuj stronęTime
5min / 10min / 15min / 30min / 45min / 60min.
Operating
1. Push the POWER button.
2. Select the curing time considering the material and shape of the printed output.
3. Press the START button to activate.
4. When the curing is finished, it will stop the operation and generate a beeping sound.
Precautions
•
To stop the curing, press the STOP button.
•
Do not change the position of the NextDent Cure during operation.
•
Avoid UV light exposure.
•
Be sure to position the equipment such that it is easy to operate.
•
Use only authorized accessories (f.e. power cord).
•
Wear gloves and eye protector.
•
Do not modify: NextDent Cure is intended to be used as directed only.
•
For professional use only.
Maintenance
Cleaning
1. Clean the inside of the NextDent Cure's chamber and wipe it with a smooth clean cloth.
2. After cleaning, assemble the removed accessories.
Safety Symbol
The following symbols are found on the device and this document.
Always use the equipment in the safest possible manner.
CAUTION: When moving the unit, be sure to turn off the power.
Environmental conditions
Installation: indoor
Altitude: up to 2000 m
Operating Temperature / humidity: 0 - 40 ℃ / 20 – 80 %
Packaging
Take care when opening.
Please keep your packaging.
Keep the original box for future shipments.