3D Tender LUX 325 Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Łodzie 3D Tender LUX 325. 3D Tender LUX 325 18 stron.

3D Tender LUX 325 Instrukcja obsługi
Performance
To achieve best performance, the boat must plane. If the boat does not plane, you may check
the following:
- Make sure sure the bilge / deck is dry, drain the water othewise.
- Make sure the tube is correctly inflated.
- Make sure you have the correct weight distribution. Sea conditions may require passengers to
move forward to the boat to get the boat on plane before they return to their initial positions.
The outboard engine plays a big role in the performance of the boat. Please make sure you use
a suitable outboard engine for the boat.
Outboard trim angle can be ajusted to improve planing and general performance. Adjust the po-
sition of the trim rod of your motor to define the trim angle of the outboard motor in relation to
the transom. Make test runs with the trim set to different angles to find the position that works
best for your boat and operating conditions.
Bow down, too much trim-in
Bow up, too much trim-out
Right position
13
www.3dtender.com