3D&PRINT 3D Pen Pro Podręcznik - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik dla Akcesoria 3D&PRINT 3D Pen Pro. 3D&PRINT 3D Pen Pro 20 stron.

Drukuj stronę

WARNINGS

CAUTION:
• This device can't be used by
children under 14 years old.
• Keep out of reach of children
under 14 years old.
• This appliance is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capabilities,
or lack of experience and
knowledge unless they have
been given supervision or
instruction concerning use of
the appliance by a person
responsible for their safety.
• Do not use any other material
besides PLA and ABS.
• Before using other filament,
clean the pen properly and make
sure that the old filament is
removed from the nozzle.
• Never try to remove the filament
from the pen's tail. This can
cause damage to the 3D pen.
• Do not use the device when
damage to housing or cables is
noticed.
• Do not attempt to service the
device yourself.
• Do not use the 3D pen if it is
damaged in any way.
• Do not dispose of electrical
appliances as unsorted
municipal waste, use separate
collection facilities.
BURN HAZARD:
• When using the 3D pen, the nozzles
temperature is high. Do not touch
the nozzle or surroundings close
to the nozzle when the power is
on and wait for the 3D pen to cool
when powering off. Do not touch
the filament shortly after applying.
• Do not place the device on any type
of fabrics.
• Avoid skin contact. In case of burns
wash out wounds with cold water.
• Always use something to protect
the surface you are working on
while using the 3D pen.
• Only use the power adapter from
3Dandprint.
• When the 3D pen is not in use,
pull out the power plug.
Avoid carbonization of the filament
when the 3D pen is heated and not
used for a long time. We advise you
to remove the filament when you
store the 3D pen.
WARNING:
Do not use the 3D pen near bathtubs,
showers, basins or other vessels
containing water.
3Dandprint shall have no liability for
any injuries or damage by misuse of
the 3Dandprint 3D printing pen.
3