3dBanRC BanRC2 Podręcznik użytkownika - Strona 13

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Zabawka 3dBanRC BanRC2. 3dBanRC BanRC2 16 stron.

Printer:

All printers which have a basic printing dimensions of 200mmx200mmx180mm with heat bed

& Nozzle 0.4mm can print this Glider.

Tip: Before you buy the design, you can test your printer, download the

biggest and highest part Wing Part1 if your printer can print this part then it can print all the

parts of this model.

Printing:

Please keep these figures in mind:

Print the parts individually, not in groups.

Use raft for easy clean after print. All parts are flat, no need to apply support.

- In slicer be sure "Slicing Tolerance" is activated "Exclusive". So, the printer can print the ribs.

- To avoid ribs appears on skin, in slicer be sure of "Outer Walls before inner walls" is activated.

Cooling fan is OFF. For sure the fan for nozzle heat end its always ON.

- Glass on bed. 3DLAC spray for bed adhesive. OR as your own convenient material.

- 0.4mm nozzle head, Parts are designed on 0.4mm wall thickness.

- PLA filament.

- Follow slicer setting values to get the same weight "gm" shown in paragraph "Parts weight"

Test STL

Files. The