abc 9kW LILLY Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Piec na pellet abc 9kW LILLY. abc 9kW LILLY 19 stron.

Storage of Pellets

It is very important that the pellets are stored at the dry place. It is not

advisable to store pellets in bags exposed to atmospheric conditions.

Too wet pellets may block the auger

5.TECHNOLOGY

Your new stove is technologically enhanced as a result of years of

testing and top quality built-in components. The practical advantages

of the Lilly stove are as follows:

Electronic monitoring of all devices along with monitoring of

combustion temperature in the ﬁrebox guarantees the optimum

operation of stove in all phases.

The large heat exchanger surface with the unique control of

combustion air results in low consumption of pellets and high

energy efﬁciency.

Precisely weighed pellet loading to the burner made of special cast

iron leads to perfect combustion resulting in low emission of

hazardous substances into atmosphere.

The top quality cast parts such as burner resistant up to 1300 and

doors ensure long and safe operation.

Remove all accessories from the stove (user manual, power cable,

remote controller, etc.).

The stove must be connected to the chimney the minimum diameter

of which is 120mm.

The combustion air circulation is based on the negative pressure in

the ﬁrebox and very low overpressure in the ﬂue pipe. The ﬂue pipes

must ﬁt the diameter of outlet pipes and no leaks shall be detected at

joints.

Make sure that the horizontal length of the ﬂue pipe does not exceed

1.5m.

Do not install too many elbows (direction changes of ﬂue gases) on

ﬂue pipes. The maximum number of elbows shall be 3.

Be sure to leave the room for easy dismantling of the ﬂue pipe and

easy access to the opening for cleaning.

The stove must be installed on the ﬁre-proof surface. Should the

surface be ﬂammable (wood, carpet, etc.), it is recommended to set a

ﬁreproof basis (glass, metal, ceramic tiles, etc.)