CAME BK-2200T Instrukcja instalacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Otwieracz drzwi garażowych CAME BK-2200T. CAME BK-2200T 17 stron.
Drukuj stronę
"CAUTION: IMPROPER INSTALLATION MAY CAUSE SERIOUS DAMAGE, FOLLOW ALL INSTALLATION INSTRUCTIONS CAREFULLY"
"THIS MANUAL IS ONLY FOR PROFESSIONAL INSTALLERS OR QUALIFIED PERSONS"
Legend
This symbol indicates sections to be read with particular care.
This symbol indicates sections concernig safety
This symbol indicates notes to communicate to users.
Destination and limits of use
Destination
The BK2200T gearmotor is designed for automating sliding gates on residential, condominium and industrial buildings.
The use of this product for purposes other than the one intended and installation carried out in a manner other than as instructed in
this technical manual are prohibited.
Limits of use
For intensive or condominium use: maximum gate weight 2200 kg with maximum length of 23 meters.
Standard followed
The company CAME cancelli automatici is ISO 9001 quality certified; it has also obtained the ISO 14001 environmental safeguarding
certification. CAME engineers and manufactures all of its products in Italy.
This product complies with the following legislation: see Declaration of Compliance.
Description
Gearmotor
The BK2200T ratiomotor is designed and built by CAME CANCELLI AUTOMATICI S.p.A. and it meets the safety standards in force.
The case consists partly of cast aluminium, inside of which operates the non-reversible electromechanical gearmotor, and partly of a
covering in ABS plastic inside of which is an electronic card, the transformer and the emergency battery holder.
Modello:
001BK2200T – Gearmotor for gates weighing up to 2200 kg and 23 m long, with a 6 meter module pinion.
Control panels:
002ZT6 – Control panel.
002ZT6C – Control panel complete with safety block and keys.
Completion accessories
001 R001 - Lock cylinder with DIN keys;
009CGZ6 – Galvanised 30 x 30 6 module rack in laminated steel.
001 BRC515 - Power supply cable winding device for sensitive safety profi les;
001 B4353 - Chain transmission device;
009 CCT - Simple 1/2" chain;
009 CGIU - 1/2" chain joint.
Important! Check that the safety equipment and accessories are CAME originals; this is a guarantee that also makes the system
easy to set up and upkeep.
Technical information
Power supply: 400/230V a.c.
Motor power supply: 230/400V a.c. trifase
Max. absorption: 1,5 A
Rated power: 600 W
Reduction ratio: 1/28
Push: 1650 N
Max. speed: 10,5 m/min
"IMPORTANT SAFETY INSTRUCTIONS FOR INSTALLATION"
Operation intermittence: 50%
Protection level: IP54
Weight: 21 kg
Operating temperature: