CAME FROG-PM4 Instrukcja instalacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Otwieracz drzwi garażowych CAME FROG-PM4. CAME FROG-PM4 19 stron. Swing-gate operator
Również dla CAME FROG-PM4: Instrukcja instalacji (13 strony), Instrukcja instalacji (17 strony), Instrukcja obsługi (12 strony)

Drukuj stronę

Dimensions

(mm)

Description of parts

Installation

Installation must be carried by skilled, qualified technicians in accordance with current regualtions.

Preliminary checks

Before beginning to install, the following is necessary:

Set up a suitable omnipolar cut-off device, with distances greater than 3 mm between contacts, wit sectioned power source;

• Set up proper conduits and electric cable raceways, making sure these are protected from any mechanical damage;

• Set up a drainage tube to prevent stagnation of moisture that can lead to oxydation;

• Check that any protection circuit connections (ground),

conductive parts.;

• Make sure the gate is sturdy enough, the hinges sound and that there is no friction among fixed and moving parts;

Make sure there are opening and closing strike plates.

586

inside the container, be properly insulated compared to the other

1) Gearmotor

2) Lever

3) Cams

4) Gate bracket

5) Anchoring lever

6) Sink box

7) Box cover

8) Optional limit switch assembly

9) Limit switch adjusting screw