CAME V900E Instalacja standardowa - Strona 5

Przeglądaj online lub pobierz pdf Instalacja standardowa dla Otwieracz drzwi garażowych CAME V900E. CAME V900E 13 stron. Automatic traction system for overhead and sectional doors

Drukuj stronę

SLIDING LEVER FASTENING

- Centrally fix the transmission arm to the door's upper crosspiece with the rivets provided (or possible screws);

- Move the sliding runner and hook it to the transmission arm after removing the preset screw.

N.B.: if the adapter arm (V201) is used, hook the carriage to the sliding runner.

GEARMOTOR INSTALLATION

- Remove the automation container cover by unscrewing the ø3.9x13 screw;

- Fasten the gear motor to the sliding rail's back terminal in the desired position with the three ø6.3x45 screws provided;

ø3,9x13

RELEASING THE GEARMOTOR

- Turn the release handle as illustrated; the release will re-hitch automatically at the first manoeuvre, by returning the lever to its

start position.

- If there is a V121 cable release device (read the technical documentation accompanying the accessory for assembly instructions),

turn the handle as illustrated to lock and the gearmotor.

ø6,3x45

V121

Release

Engage