Acoustic Preference GRACIOSO 1.0 ST (STANDARD) Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Głośniki Acoustic Preference GRACIOSO 1.0 ST (STANDARD). Acoustic Preference GRACIOSO 1.0 ST (STANDARD) 12 stron. High definition 2 way-down fire bass reflex loudspeakers
Drukuj stronęMid-bass section (Special high grade from MOREL)
Dimension 160mm (6.3")
Transient Power 10ms 1000W
Nominal Power Handling (DIN) P 150W
Uniflow™ Aluminum diecast chassis
Hybrid™ Neodymium/Ferrite magnet system
Titanium coil bobbin
3" Large Hexatech™ Aluminum voice coil
High power handling
Cone Material Injected Damped Polymer Composite
High Xmax, Low Qts, Low Fs, High QM
Tweeter (Special high grade from SCANSPEAK)
26 mm (1") Ring Dome Diaphragm
Patented Symmetrical Drive (SD-2) motor
Diffraction Damping Rubber Front
Patented Phase Plug Design
AirCirc Motor Design w. 6 Neo magnets
Die Cast Rubber Painted Alu Face Plate Note
Crossover
12 dB/oct/LKR/2800 Hz crossover
Mundorf Air Foil Coils, 99.99% pure OFC copper with Polypropylene insulation.
Mundorf High-End Audio Grade MKP capacitors.
High quality Rhodium Bi-wire terminals
Point-to-point construction with UP-OCC Cupper/teflon internal wiring
Circuit boards base from hard wood plates in suitable thickness
3. HANDLING
After removing the external covering of packing, grasp the straps to lift the loudspeaker out of the packing
box. Follow all the enclosed instructions for setting up the loudspeakers.
Figure 1: After removing the external covering of packing, grasp the straps to lift the loudspeaker out of the wooden crates.
MANUALS GRACIOSO 1.0 ST
Page
4 | 12