Acoustic Research AW880 Podręcznik szybkiej konfiguracji - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Głośniki Acoustic Research AW880. Acoustic Research AW880 7 stron. Wireless indoor stereo speaker

Drukuj stronę

II.

Connecting the Speaker System:

Powering the Transmitter

Connect the small, round plug from the transmitter AC power adapter (M) to the transmitter power input jack

(I) and plug the other end of the transmitter AC power adapter (M) into any standard 120V AC wall outlet.

Note: Be sure to use the AC power adapter rated 12V DC 100 mA.

Note: There is no transmitter ON/OFF switch. The transmitter is designed to be left plugged in and powered

at all times.

If you do not intend to use the AW880 for an extended period of time, you may wish to unplug the transmitter

AC power adapter.

II. Connecting to an Audio Source:

i. Connecting with I-pod, Mp3....etc.

Connect the 3.5mm audio IN cord (I) into the music source out directly.

ii. Connecting to an A/V Receiver:

1. If necessary, connect the "Y" adapter cable (Not included) to the 3.5mm mini plug cable coming out of

the transmitter.

2. Connect the RCA-type left (white) and right (red) audio plugs on the "Y" adapter cable to the

corresponding left and right audio outputs of your A/V receiver, amp or other audio source.

iii. Connecting to a Stereo or a Computer:

1. Plug the cable coming out of the transmitter into the headphone output of your stereo or the audio output

jack on your computer. Or use the included 1/4" headphone adapter (Not included) to convert the 3.5mm

plug to a 1/4" plug as needed.

Warning: This product is designed to work with line level outputs or headphone outputs only. DO NOT

connect it directly to speaker outputs, as it will permanently damage the transmitter.

III.

Powering the Speakers

There are two options to power your wireless speakers:

i. AC Power Adapter:

1. Turn the speaker volume down by rotating the volume (D) on the rear of the speaker all the way to the

left.

2. Insert the small, round plug from one speaker AC power adapter (N) into the speaker power input jack

(E).

3. Plug the other end of the speaker AC power adapter into any standard 120V AC wall outlet.

Note: Be sure to use the speaker AC power adapters rated 18V DC 500 mA.

4032009REV1