3DHS SLICK 580 Instrukcja montażu - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Zabawka 3DHS SLICK 580. 3DHS SLICK 580 16 stron.

Tips for Success:

1. Before starting assembly, take a few minutes to read the entire instruction

manual to familiarize yourself with the assembly process.

2. Please take a few minutes and go over all the seams on the aircraft with a

covering iron on a medium heat setting. Due to the printed color scheme using

an iron sock is mandatory to prevent scratching the surface of the covering.

3. Use a fresh bottle of thin CA with a fine glue tip when attaching the CA

hinges. This will ensure that the proper amount of CA wicks into the hinge

and surrounding balsa wood and creates a proper bond between the wood and

hinges.

4. Apply a couple drops of CA to high stress areas such as anti-rotation pins,

landing gear mounts, servo trays and motor box joints .

5. Take the time to properly balance and trim your aircraft and set up rates

and exponential values. Your flying experience will be greatly enhanced by

doing this.

Items needed for completion