3Disc Heron IOS Skrócona instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt dentystyczny 3Disc Heron IOS. 3Disc Heron IOS 12 stron.

7. The scan is saved automatically at each step in the workflow.

8. To restart the scan, press the reset button. This will delete the current scan and

allow one to start a new scan.

9. After a scan step is complete you will see a green check mark in the workflow at

the bottom of the screen beneath the appropriate icon.

Scanning Step 4: Finalization (A.T.R.S)

After the basic scan has been conducted, below are some tips that should be followed

to finalize the scan.

☑ Analyze the scan for completeness and accuracy, make sure to rotate the scan

image on the main view screen in order to obtain a complete view of the scan

data

☑ Trim away excess information (tongue, cheek, vestibule, tissue, fingers, etc.)

that may interfere with a successful bite alignment. (The Trim options are on

the right side work-flow in the "TOOLS" icon)

☑ Rescan any area that is missing critical data for the success of the final

restoration

☑ Save and proceed to the next step in the scan strategy

Scanning Step 5: Exporting Files with Dentalshare & STL

• After you have successfully scanned the upper and lower jaws and aligned the

bite it is time to export the scan files to the dental laboratory for fabrication of

the restoration

• Dentalshare is a built-in file sharing system, your dental laboratory needs to

• STL exporting (outside of dentalshare)

Keyboard Shortcuts

Use these keys anytime:

• {R} – reset entire scan

• {X} – re-center scan

• {Space} – start & stop scanning

• {Enter} – same as clicking OK

• {Escape} – same as clicking CANCEL

To use while navigating:

• {Ctrl + Z} – undo last step

• {Ctrl + Y} – redo last undo

• {+/=} – increase size of tool

• {-/_} – decrease size of tool

• {C/Insert} – Crop to current

selection

• {D/Delete} – Delete selection

• Hold Ctrl while clicking a tooth to

copy last selection

• Hold Shift to apply last setting to

multiple teeth