CAME BPT AG2K200C03UK Instrukcja instalacji - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System interkomu CAME BPT AG2K200C03UK. CAME BPT AG2K200C03UK 16 stron.
Drukuj stronę
⑦
FUNCTION CODE
Setting the keypad locking time, resulting from repeatedly
entering non-existent codes (default 10 s)
- Key in the LOCKING TIME from
⑧
FUNCTION CODE
Setting monostable or bistable mode of relays (default mon-
ostable)
- Key in the desired SERVICE/RELAY.
① = activation of relay 1,
② = activation of relay 2,
③ = activation of relay 1 in Tradesman operation.
- Key in TYPE OF ACTIVATION
= BISTABLE
① = MONOSTABLE
- Repeat the procedure to set another service/relay.
⑨
FUNCTION CODE
Enabling/disabling alarm and bell (default disabled)
- Key in the mode:
= DISABLED
① = ALARM ENABLED
② = BELL ENABLED
NOTE. Enabling the alarm or the bell disables the settings
of relay 2.
FUNCTION CODE ①
Reset alarm
FUNCTION CODE ① ①
① to ⑥⑤ seconds.
Programming input I1 (default command relay 1).
- Key in:
= Command relay 1
① = Enable Tradesman
② = Command green LED A
③ = Disabled
FUNCTION CODE ① ②
Enabling/disabling keypad (default enabled).
- Key in:
= Disabled
① = Enabled
FUNCTION CODE ① ③
Programming green LED A
- Key in:
= Disabled
① = Access by pressing any button
Note. Programming is not possible if the LED is already
associated to input I1 (see function 11).
Reset procedure
- Cut power to the device.
- Repower the device again (green LED C off).
- Key in the RESET CODE within 1 min from switch-on.
Note. The stored user codes and the number of figures pro-
grammed are retained.