Altman AFS-500 Instrukcja instalacji i obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Reflektor Altman AFS-500. Altman AFS-500 14 stron. Led follow spot
Drukuj stronęAFS-500 LED Follow Spot
Connecting to the DMX512 Network
The AFS-500 LED Follow Spot offers two DMX512 connections. One for DMX Input (from a DMX source) and one DMX throughput
(out). Basic DMX512 installation consists of connecting multiple DMX controlled AFS-500 LED Follow Spots together (up to 32 Total
devices per DMX string) in "daisy-chain" fashion. A cable runs from the DMX512 control source to the DMX INPUT connection on the
first luminaire. From the DMX OUTPUT of the luminaire another cable runs to the DMX IN connector on the next luminaire (or
DMX512 device to be controlled). Please note that the AFS-500 is not an RDM luminaire.
IMPORTANT! At the end of each DMX Daisy chain, it is highly recommended that a DMX TERMINATOR (Altman Lighting part
number DMX-5-TERM) is installed on the last luminaire (or device) in the chain.
IMPORTANT! When the AFS-500 LED Follow Spot is connected to a DMX network, the White LED indicator as well as the LED
indicator lamp will flash and the local buttons and fader controls will stop responding until DMX is removed from the fixture.
For more information on installing DMX512 control systems, the following publication is available for purchase from the United States
Institute for Theatre Technology (USITT), "Recommended Practice for DMX512: A Guide for Users and Installers, 2nd edition" (ISBN:
9780955703522). USITT Contact Information:
DMX - XLR Connectors
Table 3 shows the pin outs and corresponding DMX signals for a 5-pin XLR connectors.
Note: * Only those pins shown are used. Remaining pins are not used.
DMX Map
Table 4 is the DMX map for the AFS-500 LED Follow Spot.
Channel
INSTALLATION INSTRUCTIONS / INSTRUCTIONS D'INSTALLATION
www.usitt.org
Table 3: DMX RJ45 & XLR Connector Wiring
DMX XLR Connectors Pin Out
DMX Signal
Common (Drain)
DMX -
DMX +
Table 4: AFS-500 LED Follow Spot DMX Map
Controls
1
Color Presets
Color Temperature
2
(CTO)
3
Iris
4
Dimmer (intensity)
Pin
Pin 1
Pin 2
Pin 3
DMX Value
000 - 015
White (no color filter)
016 - 040
White + Red (split half tone color)
041 - 063
064 - 087
Red + Green (split half tone color)
088 - 111
112 - 136
Green + Amber (split half tone color)
137 - 159
Soft Golden Amber
160 - 183
Amber + Blue (split half tone color)
184 - 207
208 - 231
Blue + Light Amber (split half tone color)
232 - 255
Light Amber - Bastard Amber
000 - 063
Native White CCT
064 - 127
128 - 191
192 - 255
Closed to open. (Note, when in closed
000 - 255
position [255], the iris is slightly open to
allow light to pass through).
000 - 255
0% to 100% dimming
Connecting to the DMX512 Network
Comments
Flame Red
Moss Green
Booster Blue
7400K
6000K
4200K
7