Altman Spectra-PAR SSW PAR-100 Instrukcja instalacji i obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Reflektor Altman Spectra-PAR SSW PAR-100. Altman Spectra-PAR SSW PAR-100 11 stron. Solid state lighting fixture spectra-star par series
Drukuj stronęI N S T A L L A T I O N
STAND-ALONE EFFECTS (does not require a control console):
Note: stand-alone effects from a single unit will control other units connected via DMX cable to all
synchronize. Set other units to DMX Channel 001.
(Do not use the Stand-Alone Effects while connected to a control console or a conflict will result.)
Color Fades (700-799):
700 - 709 = R>A>G>B fade
740 - 749 = B>G>A>R fade
780 - 789 = R>A>G>B>W fade
790 - 799 = W>B>G>A>R fade
Strobes (800-879):
800 - 809 = WHITE STROBE
810 - 819 = RED STROBE
820 - 829 = AMBER STROBE
830 - 839 = GREEN STROBE
840 - 849 = BLUE STROBE
850 - 858 = R-A-G-B RAINBOW STROBE
870 - 879 = B-G-A-R RAINBOW STROBE
Fixed Color Mode:
This is a special mode that allows you to manually select colors for a single unit using the 3 keys.
To enter Fixed Color Mode (or exit to Normal Mode) :
>Wait a few seconds until the display goes blank,
> press and hold the [ ONES ] button
> press and hold the [ TENS ] button
> release the [ ONES ] button
> release the [ TENS ] button.
STAND-ALONE FIXED COLOR MODE
While in stand-alone mode, the hundreds button cycles through 'r', 'G', 'b', and 'A'. colors . The tens and
ones digits select 0-99 values. 99 is actually full. The 0-255 scale is spread evenly over the 0-99 display
range.
NOTE: when you go in or out of fixed color mode, the display will go blank. Touch any button to turn
on display.
A N D
I N S T R U C T I O N
M A N U A L
700 = faster
740 = faster
780 = faster
790 = faster
800 = faster
810 = faster
820 = faster
830 = faster
840 = faster
850 = faster
870 = faster
709 = slower
749 = slower
789 = slower
799 = slower
809 = slower
819 = slower
829 = slower
839 = slower
849 = slower
859 = slower
879 = slower
9