CAME BPT MTMA/GSM Podręcznik programowania - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik programowania dla Jednostka sterująca CAME BPT MTMA/GSM. CAME BPT MTMA/GSM 16 stron. Audio gsm module for modular plate

Drukuj stronę
13. Programming the ring time and call conversation time
Code
A
5 0
.
Ring time
After pressing a call button or entering a call code on MTMKB keypads, the entry panel generates a call to the first number asso-
ciated with the group called (from 1 to 5 numbers); once the ring time (A) has elapsed without any reply, the entry panel will call
the second number in the group (if there is one), etc. When one of the numbers answers the call, the conversation time counter
(B) starts, at the end of which, if still in progress, the communication will be interrupted.
A - Enter a value between 1 and 90 seconds
B - Enter a value between 1 and 240 seconds
Note: These settings could be affected by the GSM network and/or the device receiving the call.
Note: the conversation time counter is started even if a voice mail service answers the call, therefore the call is considered
to have been successful.
Note: the fields left empty do not cause any change to existing programming.
14. Programming the door-release relay and/or auxiliary relay activation time
Code
A
5 1
.
Door-release relay activation time
A - Enter a value between 1 and 10 seconds
B - Enter a value between 1 and 3600 seconds
Note: the fields left empty do not cause any change to existing programming.
15. Choosing the colour and brightness of the keypad backlighting of all the modules that make
up the entry panel
Code
A
5 2
.
Colour
A - Enter 1 or 0 in this field (pre-set
1 = The backlighting colour is white.
0 = The backlighting colour is blue.
B - In this field enter values between 0 and 4 (pre-set
0 = Off 1 = Brightness 25% 2 = Brightness 50% 3 = Brightness 75% 4 = Brightness 100%.
Note: the fields left empty do not cause any change to existing programming.
16. Programming the function of terminals I1 and I2
Code
A
5 3
.
Function of terminal l1
A - Enter 1 or 0 in this field (pre-set
1 = The terminal functions as a relay activation button input.
0 = The terminal functions as a call 1 input.
B - Enter 1 or 0 in this field (pre-set
1 = The terminal functions to activate external video camera.
0 = The terminal functions as a call 2 input.
Note: the fields left empty do not cause any change to existing programming.
.
(pre-set
(pre-set
(pre-set
(pre-set
B
.
#
Brightness
).
0
.
).
0
).
0
B
#
Conversation time
).
3 0
).
6 0
B
.
Auxiliary relay activation time
).
1
).
1
).
2
B
Function of terminal l2
#
#