CAME BPT MTMA/GSM Podręcznik programowania - Strona 13

Przeglądaj online lub pobierz pdf Podręcznik programowania dla Jednostka sterująca CAME BPT MTMA/GSM. CAME BPT MTMA/GSM 16 stron. Audio gsm module for modular plate

Drukuj stronę

23. Requesting the firmware version of the modules installe

Code

8 2

Module

A - In this field enter the number that identifies the module whose firmware version you want to know.

1 = Request firmware version of MTMAGSM module.

2 = Request firmware version of MTMKB module.

3 = Request firmware version of MTMDY module.

4 = Request firmware version of MTMINFO module.

5 = Request firmware version of MTMBFVS module.

from 10 to 21 = Request firmware version of MTM8C modules. Code 10 identifies the first MTM8C module connected,

code 11 the next one in the cabling that connects the modules to each other, etc., up to a maximum of 12 MTM8C mod-

ules.

RESTORE FACTORY DEFAULT

To restore the entry panel to the default settings, remove the power supply, press and hold the two call buttons on the unit and

power the device.

After 5 seconds the entry panel restarts.

NOTE. If the entry panel does not restart, it has not been restored to default settings.

The product complies with the relevant directives in force.

Decommissioning and disposal. Dispose of the packaging and the device responsibly at the end of its life cycle, in compliance

with the laws in force in the country where the product is used. The recyclable components are marked with a symbol and the

material's ID marker.

THE DATA AND INFORMATION SHOWN IN THIS MANUAL ARE TO BE CONSIDERED AS SUBJECT TO CHANGE AT ANY TIME AND

WITHOUT THE NEED FOR ANY ADVANCE WARNING.

MEASUREMENTS, UNLESS OTHERWISE INDICATED, ARE IN MILLIMETRES.

? #