Alto D3 Podręcznik użytkownika - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wzmacniacz Alto D3. Alto D3 12 stron. Professional power amplifiers
Również dla Alto D3: Instrukcja obsługi (16 strony)
Drukuj stronę
MODE
set the switch to stereo
4.2 Parallel Mode
In parallel mode,
the mode selector should be set to PARALLEL, t
be output from Chanel 1 and Chanel 2 simultaneously. The volume of channel1 or channel 2 can be controlled
separately.
MODE
set the switch to parallel
4.3 Bridge Mode
In this mode, the signal input into channel 1 will be output from the bridged end, on other hand, the output level
control of channel 2 should be turn down to smallest (turn the volume control at counterclockwise).
control of channel 1 is used to control the volume of whole system.
MODE
set the switch to bridge
Channel 2
Channel 1
Channel 4
Channel 3
connect the binding posts or the speak-on connectors
Channel 2
Channel 1
Channel 4
Channel 3
connect the binding posts or the speak-on connectors
connect the binding posts or the speak-on connectors
8
Channel 1
Channel 3
he signal input from Channel 1 or Channel 2 can
Channel 1
Channel 3
Channel 2
Channel 4
Channel 2
Channel 4
Only the
volume