Acoustic Research AW791 Instrukcja instalacji i obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Słuchawki Acoustic Research AW791. Acoustic Research AW791 6 stron. Wireless surround sound headphones with dolby digital technology

Drukuj stronę

iii. Connecting to Analog Components:

You can connect the headphones to an analog device and listen to Dolby

Pro Logic recordings and compact discs.

TRANSMITTER

CHANNEL

AC 7V

D GITAL 1

DIGITAL 2

ANALOG 3

VCR

OUTPUT

RIGHT

LEF T

V ID E O

ANTENNA

OUT

Note: When using a device with a variable analog output, make sure the

volume level is set to 1/2 to 2/3 volume. When using a variable level

output, noise may occur if the signal level is too weak or too strong. Adjust

the volume to eliminate the noise.

iv. Connecting the Power Supply:

TRANSMITTER

CHANNEL

AC 7V

DIG TAL 1

DIG TAL 2

ANALOG 3

Note: Make sure the electrical outlet is not a switched outlet - usually

designed to control a lamp - and remains ON at all times. This is important,

as the transmitter base charges the headphones when not in use.

1. Connect one end of the

Analog Audio Cable (not

included) to the RCA-TYPE

ANALOG AUDIO OUTPUT of

your audio/video equipment.

2. Connect the other end of

the Analog Audio Cable to

the RCA-type Analog

INPUT

RIGHT

LEF T

V D E O

Left/Right Connectors (F3)

on the transmitter marked

"Analog 3".

1. Insert the 2.5mm barrel

connector from the AC Power

Supply (O) into the AC Input

Jack (E).

2. Plug the AC Power Supply

(O) into a standard electrical

wall outlet.

- 4 -

III

Note: The rechargeable batteries included with this product must be

charged for 10 hours before use.

i. Inserting the Batteries into the Headphones:

ii. Charging the Batteries within the Headphones:

For customers in the USA and CANADA

RECYCLING NICKEL METAL-HYDRIDE BATTERIES

Nickel Metal-Hydride (Ni-MH) batteries are recyclable. Acoustic Research asks you to help

preserve our environment and recycle any unwanted Ni-MH batteries at your nearest

recycling facility for proper disposal.

Acoustic Research participates in the Rechargeable Battery Recycling Corporation (RBRC)

program. If you need advise on proper disposal of the included Ni-MH batteries, please call

1-800-822-8837 (US and CANADA ONLY).

Caution: Do not handle damaged or leaking batteries.

Charging

the

Batteries

1. Remove the Battery Compartment

Cover (I) by simultaneously

depressing the tab and pulling up on

the cover.

2. Pull the cloth strip across the Battery

Compartment (H) so the

Rechargeable Batteries (P) can be

inserted over the strip.

3. Insert the Rechargeable Batteries (P)

observing the polarity ("+" and "-") as

diagrammed inside the Battery

Compartment (H).

4. Replace the Battery Compartment

Cover (I).

1. Place the headphones onto the

Transmitter, making sure the

charging contact on the left earcup is

sitting properly on the charging post

of the transmitter.

2. Allow the Rechargeable Batteries (P)

to fully charge for 10 hours before

using for the first time.

3. Place the headphones on the

transmitter when not in use. This will

ensure the batteries are always fully

charged for hours of entertainment.

The Rechargeable Batteries (P) use

high-capacity Ni-MH cells that allow

recharging without the memory

effect of Ni-CD cells.

- 5 -