Alto PS 3A Podręcznik użytkownika - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Głośniki Alto PS 3A. Alto PS 3A 6 stron. Passive speaker
Również dla Alto PS 3A: Podręcznik użytkownika (11 strony)
Drukuj stronę
2. PS 3A ACTIVE SPEAKER CABINET QUICK START
Make all initial connections with all the equipment powered off, and ensure that all the main volume controls are turned
completely down.
1). Connect one side of the signal cable at your audio mixer into output left /right (with Stereo-Jack or XLR) and the
other side of the cable into the line input (XLR) of your active speaker cabinet.
2). Connect the power cord to mains.
3). Turn on your mixer first, then the active speaker cabinets.
4). Turn up the volume control of the active speaker cabinets.
5). Use PFL function to get the proper input level for the mixer, and adjust the main mix level control to manipulate
the output level.
6). After using, turn off your active speaker cabinets first, then the mixer.
Tripod
Mount
-. CONNECTION PLATE
(1) BI-POLAR MAIN POWER SWITCH
(2) AC POWER SOCKET WITH MAIN FUSE
(3) GROUND SWITCH
(4) CLIP INDICATOR RED LED
(5) LINK OUT ON XLR CONNECTOR
(6) STEREO JACK INPUT
(7) MAIN VOLUME CONTROL
Signal Cable
Power Cord
Left
Main Mix
Output
Mixer
Signal Cable
Power Cord
Right
Main Mix
Output
(6)
"WARNING"
3
Tripod
Mount
(5)
(4)
(7)
VOLUME
LTO
R
+4dBu
PS 3A
PS 3A
INPUT
LINK
CLIP
ACTIVE SPEAKER CABINET
BAL
BI-AMP. POWER AMPLIFIER
(3)
SHIELD
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
MODEL
220-240V
50/60Hz
POWER
SERIAL
Use only with a 250V fuse
(2)
(1)