3Dlabs X400 Skrócona instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Drukarki 3D 3Dlabs X400. 3Dlabs X400 16 stron.

INTRODUCTION AND HOW TO GET HELP

We'd like to thank you for purchasing the 3D Labs X400 High Temperature 3D printer. Proudly

assembled and calibrated in the US, in Jacksonville Florida. The X400 is a rugged, industrial grade

machine that will provide years of service and repeatability.

This guide has been assembled to help you quickly get setup and to complete your first successful print.

Please reference our website at

documentation. A full manual and support videos are available there.

Your 3D Labs X400 is a machine tool. As with operating any machine tool, there is a learning curve. 3D

Labs has implemented multiple features to make the machine easier to learn and use. With the proper

time invested, you will learn how to properly operate your 3D printer to it's max potential and it will give

you the best results.

3D Labs support is here to help you flatten the learning curve. 3D Labs support can be reached by

phone at (904) 201-9593, by email at [email protected], or via support ticket at

https://www.3dlabs.io/support

3D LABS X400 3D PRINTER

QUICK START REFERENCE GUIDE

TOOL BAG CONTAINING

3x Hex (allen) wrenches, 3 x wrenches

b. Spare screws and nuts bag

c. Spare heater cartridge and thermistor

d. Spare low temp hotend

e. Spare high temp hotend w/brass nozzle

Spare endstop, filament runout sensor

2 x spare brass nozzles

Spare spring, knurled nut, and screw for tension assembly

Spare low temp fan shroud

Spare BLTouch bed sensor

Spare fuse

Spare stepper driver

USB thumb drive

Tweezers, Pin for clearing nozzle clogs

Phillips head screwdriver

Purple glue stick

Spare blower fan, Masking tape

2 x 1KG rolls of ABS (or ASA)

5. High temp carbon fiber print surface

6. 12 gauge 20 amp power cable

https://www.3dlabs.io/support

should you have any questions.

for more complete manuals and

Page | 3