Alto 30HA STANDARD I/MASTER I Instrukcja obsługi - Strona 14
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Myjka ciśnieniowa Alto 30HA STANDARD I/MASTER I. Alto 30HA STANDARD I/MASTER I 19 stron. Alto-shaam inc. pressure washer user manual
Również dla Alto 30HA STANDARD I/MASTER I: Instrukcja obsługi (19 strony)
Drukuj stronę
4.0 Fields of application and working methods
4.1 Fields of application
The most important fields of application for this product are:
Agriculture
Transport
Building and construction Building renovation, cleaning/degreasing of vehicles, equipment,
Industry
Service
4.2 Working pressure
The high pressure washer may be used with high or low pressure at your own option. At the standard spray
lance the working pressure is adjusted by turning the reduction valve.
Low pressure
High pressure
Intermediate pressure
4.3 Detergents
The most efficient cleaning is obtained from detergents in conjunction with high pressure cleaning. For that
purpose ALTO can offer you a series of products specially developed for high pressure cleaning, eg
Cleaning of vehicles, machines, stalls etc.
Degreasing
Descaling
The products are water-based, without phosphates, and the applied tensides (surface active substances)
comply with the present requirements for easy biodegradability.
Contact your ALTO distributor for directions as to which product will fulfil your requirements.
The method of application and the dosage of the individual products appear from the product labels or the
data sheet. The dosage is adjusted on the dosing unit of the high pressure washer.
4.4 Dosing of detergents
The high pressure washer features a built-in injector enabling dosing of detergent to the water when the
cleaner is in low pressure mode. With this dosing unit it is possible to vary the dosing of detergent infinitely
between 0-3%, and thus most cleaning jobs will be covered (also see section 3.1.6).
Change from application of detergent under low pressure to cleaning under high pressure is simply effected
by regulating from "low pressure mode" to "high pressure mode" on the spray lance. You will not have to
mount or dismount any parts by normal use of detergent.
For foam cleaning you will have to mount the special foam injector between the high pressure washer and
the high pressure hose. Insert the suction hose of the injector into the foam detergent. Mount foam lance
on spray handle and now you are ready for foam application. Upon the application dismount the foam
injector and replace the foam lance by a spray lance and you are ready for cleaning.
12
Cleaning of machinery, agricultural implements, stalls, and buildings
Cleaning of cars, engine rooms etc.
buildings etc.
Degreasing and cleaning of machines and vehicles.
Cleaning of vehicles and degreasing tasks.
Is first and foremost used for application of detergents and for washing
off.
Is used for cleaning.
As an example it may be used for the cleaning of surfaces, which cannot
stand a too powerful water jet, i.e. soft surfaces.
Disinfection
Maintenance of the high pressure washer
GB