DIVERSIFIED 2964K Instrukcja montażu - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz DIVERSIFIED 2964K. DIVERSIFIED 2964K 7 stron. Forward vision iii

Drukuj stronę
ASSEMBLY TEMPLATE
CORNER
LEG
THROUGH HERE WITH LOCK
CLOSE UP OF CORNER BRACKET ASSEMBLY
STEP 4:
INSERT HANGER BOLT ON ONE OF THE LEGS THROUGH
THE CORNER BRACKET AND INSERT LOCK WASHER
1
AND HEX NUT. TIGHTEN NUT USING
" WRENCH OR
2
SOCKET AND TORQUE WRENCH, TO A MINIMUM OF
12FT LBS BUT NOT TO EXCEED 17FT LBS. REPEAT FOR
OTHER CORNER LEG.
NOTE:
1.
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\2924K & KF, 2926K & KF, 2964K & KF,
LEG LEVELER
INSERT HANGER BOLT
WASHER AND HEX NUT
LEG
BOOT
CLOSE UP OF LEG LEVELER AND
LEG BOOT ASSEMBLY
STEP 5:
SLIDE LEG BOOT ONTO LEG WITH
FLARED END TOWARDS BOTTOM
OF LEG. SCREW LEG LEVELER
1
"
2
INTO T-NUT ON BOTTOM OF THE
LEG. REPEAT FOR ALL LEGS. SET
WORKSTATION FRAME ASIDE.
A
CREATED DRAWING
REV.
L BRACKET - TYPICAL
RIGHT SIDE OF WORKSTATION SHOWN
STEP 6:
WITH HELP FROM ANOTHER PERSON, STAND WORKSTATION FRAME UP. POSITION FRAME UP TO CABINET. ATTACH L BRACKET
ONTO APRON WITH SCREWS PROVIDED. ATTACH BRACKET ONTO BACK OF WORKSTATION WITH THE REMAINING SCREWS.
DWN
BY:
APR
BY:
APR
BY:
11/8/16
EMK
-
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
DESCRIPTION
DATE
NAME
ECN NO.
BE ALTERED OR CHANGED WITHOUT
REVISION LEVEL
PERMISSION
FRONT OF WORKSTATION
ATTACH WORKSTATION
FRAME TO CABINET HERE
(REPEAT ON OTHER SIDE)
WORKSTATION FRAME
LEFT SIDE OF WORKSTATION SHOWN
DWN
11/8/16
EMK
DATE:
DATE
APR:
DATE
APR:
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
TITLE:
FORWARD VISION III
ASSEMBLY INSTRUCTIONS
DRAWING NUMBER:
FORWARD VISION III
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
SCALE:
SHEET:
REVISION:
REV A
NTS
5 OF 7