Alto L-6 Podręcznik Ownes - Strona 17

Przeglądaj online lub pobierz pdf Podręcznik Ownes dla Sprzęt nagrywający Alto L-6. Alto L-6 19 stron. 6-channel mixing console with digital effects

Drukuj stronę

9. TECHNICAL SPECIFICATION

Mono input channels
Microphone input
Frequency response
Distortion (THD & N)
Gain range
SNR (Signal to Noise Ratio)
Line input
Frequency response
Distortion (THD & N)
Sensitivity range
Stereo input channels
Line input
Frequency response
Distortion (THD & N)
Impedances
Microphone input
All other inputs
Tape out
All other output
Equalization
Hi shelving
Mid bell
Low shelving
DSP Section
A/D and D/A converters
DSP resolution
Type of effects
Presets
Controls
Main Mix Section
Noise (bus noise)
Noise (Bus noise)
Max output
AUX Returns gain range
AUX Sends max out
Power Supply (AC/DC Adaptor)
Main voltage
Fuse
Power Consumption
Physical
Dimension(W D H)
Net weight
Shipping weight
electronically balanced, discrete input configuration
10 Hz to 55 kHz, +/ 3 dB
0.005% at +4 dBu, 1 kHz
0 dB to 60 dB (MIC)
115 dB
electronically balanced
10 Hz to 55 kHz, +/ 3 dB
0.005% at +4 dBu, 1 kHz
+15 dBu to +/-45 dBu
Balanced
10 Hz to 55 kHz, + / 3 dB
0.005% at +4 dBu, 1 kHz
1.4 kOhm
10 kOhm or greater
1 kOhm
120 Ohm
+/ 15 dB @12 kHz
+/ 15 dB @ 2.5 kHz
+/ 15 dB @ 80 Hz
24-bit
24-bit
Vibraflange, Funky, Rockabilly, Bigstage, Vibrato1-4,
Flanger1-4, Chorus1-4
16
16-position PRESET Selector, FX level,
REVERB level, CLIP LED
Fader 0 dB, channels muted: 100 dBr (ref.:+4 dBu)
Fader 0 dB, channels muted: 85dBr (ref.:+4dBu)
Fader 0 dB, all input channels assigned and set to
UNITY gain: 90 dBr (ref.:+4 dBu)
+22 dBu unbalanced, 1/4" jacks
-
to +15 dB
+22 dBu
USA / Canada 100-120 V~, 60 Hz
Europe 210-230 V~, 50 Hz
U.K. / Australia 240 V~, 50 Hz
15 Watts
185 mm
230 mm
1.4 Kg (3.09 lb)
2.7 Kg (5.95 lb)
35/55 mm
15