Alto LYNX-MIX62 Podręcznik użytkownika - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt nagrywający Alto LYNX-MIX62. Alto LYNX-MIX62 20 stron.

4. CONTROL ELEMENTS

4 AUX SENDS

For AUX1(MON) jack, use this to connect the input of an external amplifier or active

monitor speaker. For AUX2(FX) jack, use this to output the line level signal of the

AUX2 post fader bus. You can use it to feed the inputs of a stereo multi-effects

(you will need a Y-type cable ).

5 AUX RETURNS

You can use these stereo 1/4" phone sockets to return the stereo signal of an

effect unit to the Main Mix. Alternatively you can use them as an extra auxiliary

input and using the AUX RETURN level control as volume control. The signal will

be sent directly to MAIN MIX control.

6 CTRL ROOM OUTPUT

These 1/4" phone sockets will be used to send the signal to a pair of powered

Studio Monitor speakers or to a second set of PA.

7 MAIN MIX OUTPUTS

This stereo output is controlled by the Main Mix Level on the Master section

and will send the audio signal to an amplifier or to a pair of active speakers. The

output level can be varied from -

8 CD/TAPE IN

Use the Tape input to connect a CD Player, Tape, DAT, iPOD or any other line-

level source. You can send this signal either to CONTROL ROOM OUTPUT and/

or to the MAIN MIX OUTPUT using the relative CD/TAPE TO select buttons.

9 CD/TAPE OUT

These RCA jacks will route the main mix signal into a tape or DAT recorder.

10 PHONES

This socket will be used to send the signal to a pair of headphones.

CHANNEL STRIP

11 LEVEL

This knob controls the channel's level from -

12 PEAK LED

This red LED will let you know about the status of the signals processed into

your

L YNX-MIX62(FX)

MIX62(FX)

and sing/play at normal volume. Set the level control of that channel

so that the PEAK LED lights-up only occasionally. If this LED is always on, you

are experiencing a lot of distortion and you should turn the GAIN control down

or reduce the EQ boosting. If this led never lights up, turn the GAIN control up

again.

to +10 dB.

.Connect a microphone or an instrument to your

to +10 dB.

L YNX-