Alto PBM4 SISTEMA Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt nagrywający Alto PBM4 SISTEMA. Alto PBM4 SISTEMA 16 stron. Compact powered mixer
Również dla Alto PBM4 SISTEMA: Podręcznik użytkownika (16 strony), Instrukcja obsługi (18 strony)

Alto PBM4 SISTEMA Podręcznik użytkownika
12 MAIN
There is the Main Mix Control adjusting the overall volume assigned to the 2
internal speakers or to the MAIN POWER OUT speakers.
13 MAIN LED METER
This 4 segments LED Meter will monitor the volume assigned by the MAIN level
control. If the +10 LED flashes, you have reached the limit of the internal
45+45W amplifier and the outgoing signal is approaching distortion. +10 LED
should flash only occasionally. If no LED is blinking, it means that the output
level is too low, so either you do not hear any music or the signal is too low to
the noise level. For optimal functioning LEDs marked -10 and 0 should always
be blinking.
14 MONITOR
Via this Control, you can adjust the signal
Level applied to the MONITOR OUT sockets.
15 OPERATING
This LED will blink when your PBM4 SISTEMA
is switched ON.
REAR PANEL
16 POWER ON/OFF
This switch is used to turn the main power ON/OFF .
17 AC INLET
Use it to connect your PBM4 to the main AC with the supplied AC cord. Please
check the voltage available in your country and how the voltage for your PBM4
SISTEMA is configured before attempting to connect your PBM4 SISTEMA to
the main AC.
4. CONTROL ELEMENTS
3. CONTROL ELEMENTS
POWER
ON
OFF
16
12
FUSE 2A
AC~230V
50/60Hz
17
13
15
14
2
7