DIVERSIFIED SPACES P772 Series Instrukcja montażu - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Wyposażenie wnętrz DIVERSIFIED SPACES P772 Series. DIVERSIFIED SPACES P772 Series 11 stron. 6 legged table
Drukuj stronę
IN HOUSE ASSEMBLY TEMPLATE
0.50
RIGHT SIDE OF MIDDLE BRACE WITH STRETCHER BRACKET
CLOSE UP OF STRETCHER BRACKET ASSEMBLY ON A SINGLE SIDED TABLE
NOTE:
1.
K:\AutoCAD\Assembly Instructions\P770, P771, & P772 SERIES TABLES.dwg,
11/3/2021 10:01:29 AM, DWG To PDF.pc3
BOTTOM EDGE
OF STRETCHER
CENTER BRACE
LEFT SIDE OF MIDDLE BRACE WITH STRETCHER BRACKET
BOTTOM SIDE OF TABLE SHOWN
A
CREATED ASSEMBLY INSTRUCTIONS
8/29/14
REV.
DESCRIPTION
DESCRIPTION
DATE
DATE
REVISION LEVEL
0.50
TOP EDGE OF
STRETCHER
ALL DIMENSIONS ARE IN INCHES UNLESS
DWN
EMR
NOTED OTHERWISE
BY:
DECIMALS:
APR
BY:
ANGLES:
APR
CABINET SQUARENESS
BY:
CONFIDENTIAL:
ALL DESIGN RIGHTS RESERVED
THE INFORMATION, DATA, DESIGN, AND DRAWINGS EMBODIED
IN THIS DOCUMENT AND ALL REPRODUCTIONS THEREOF ARE
THE EXCLUSIVE PROPERTY OF DIVERSIFIED WOODCRAFTS, INC.
THESE DOCUMENTS ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES WITHOUT
EMR
-
WRITTEN CONSENT OF DIVERSIFIED WOODCRAFTS, INC. ANY
NAME
NAME
ECN NO.
REPRODUCTION IN PART OR WHOLE WITHOUT WRITTEN
CONSENT IS SUBJECT TO LEGAL ACTION.
STEP 7:
IF YOU HAVE A DOUBLE SIDED TABLE, SKIP TO STEP 8.
ATTACH ONE BRACKET 0.50" FROM THE BOTTOM EDGE
OF STRETCHER AND ONE BRACKET 0.50" FROM TOP EDGE
OF STRETCHER.
PRE-DRILL HOLES IN STRETCHERS WITH A
3
ATTACH WITH #8 X
" SCREWS.
4
GO BACK TO STEPS 2 AND 3 AND TIGHTEN THE HANGER
BOLTS FOR EACH LEG USING A
SOCKET AND TORQUE WRENCH, TO A MINIMUM OF 12FT
LBS BUT NOT TO EXCEED 17FT LBS.
DATE
8/29/14
DWN:
DATE
APR:
DATE
APR:
diversifiedwoodcrafts.com
TITLE:
6 LEGGED TABLE
ASSEMBLY INSTRUCTIONS
DRAWING NUMBER:
P770, P771, & P772 SERIES
1
" BIT AND
8
1
1
WRENCH OR
"
2"
2
300 South Krueger Street
Suring, WI 54174
SCALE:
SHEET:
REVISION:
REV A
NTS
9 OF 11