3DP Workbench Podręcznik - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik dla Drukarki 3D 3DP Workbench. 3DP Workbench 12 stron. Moving and folding the gantry

3DP Moving and Folding the Gantry

Approved By:

Date: <6/14/2016>

Page 11 of 11

Step 9: Returning the system to use.

With the cart in place, return the unit to its original location on the cart. Align the back

plate of the unit with the two edges of the handle bracket at the rear of the machine.

Step 10: Plug in cables.

With the unit in place, plug all removed cables back into their proper place taking care to

ensure the cables are in the correct locations on the control box. After all the cables are

secure plug unit into the power source and then follow the start up proccedures that come

with your unit.

WI XXXX-xxxxxx– 3DP Moving the Printer