3DR Quad Frame Kit Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Quadcoptery 3DR Quad Frame Kit. 3DR Quad Frame Kit 13 stron. Quadrocopter
Drukuj stronęRC C AL IB R AT ION
Mission Planner's RC calibration utility teaches APM to work
with your RC transmitter. Open Mission Planner. Connect
APM to your computer using the provided micro-USB cable.
Windows will automatically install the correct drivers for
APM. In Mission Planner, select the COM port for
Mega, set the Baud rate to 115200, and select Connect.
1
Turn on your transmitter, and ensure it is set to airplane mode (not helicopter mode). In Mission
Planner, navigate to
Radio. Move the transmitter's sticks and mode switches to all available positions until the red
bars are set at the extremes for each control. Select
Mission Planner: Radio Calibration Screen
2
3
1 Select Initial Setup.
2 Select Mandatory Hardware.
3 Select Radio Calibration.
2
Initial
Setup,
Mandatory
1
5
4 Select Calibrate Radio.
5 Move transmitter sticks and switches to all positions.
6 Select Click when Done.
Arduino
Connect APM to Mission Planner:
1 Select Arduino Mega.
3
2 Select 115200.
3 Select Connect.
Hardware, and
Radio
Click when Done
4
6
APM USB port
Calibration. Select
Calibrate
to complete RC calibration.
Left Stick:
Right Stick:
9