Clear2there C2TDVR1004 Podręcznik użytkownika - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla DVR Clear2there C2TDVR1004. Clear2there C2TDVR1004 18 stron. 4 channel 1000 series
Drukuj stronę1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any of the ventilation openings.
Install in accordance with the Manufacturer's instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus that produce
heat.
9) Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong.
The wide blade or the third prong is provided for your
safety. When the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete
outlet. .
10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11) Only use the attachments/accessories specified by the
manufacturer.
12) Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when
unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15) This equipment is indoor use and all the communication
wirings are limited to inside of the building.
16) The socket-outlet shall be installed near the equipment
and shall be easily accessible.
17) CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
# Operation Max temperature : 40℃
# USB Load condition: USB Ports (5 VDC, Max. 500 mA)
2. BEFORE INSTALLATION
● Installation should be carried out only by qualified
personnel and in accordance with any electrical regulations
in force at the time.
● The DVR must be placed on a stable surface or mounted
in an approved cabinet.
Adequate ventilation must be provided, taking particular
care not to block any of the air vents on the DVR.
● Adequate protection against lightning strikes and power
surges must be installed to prevent damage to the DVR.
● Any safety warnings on the DVR and in these
instructions must be adhered to.
● If cleaning is necessary, shutdown the DVR and
disconnect power first. Use a soft dry cloth only never use
any abrasive cleaners.
● Do not attempt to service or repair the DVR as opening
or removing covers may expose dangerous voltages or
other hazards. Refer all servicing to qualified service
personnel.
3. MAIN FEATURES
MOUSE CONTROL
Designed to be controlled by mouse and easy to use.
ENHANCED GRAPHICAL USER INTERFACE [GUI]
The DVR menu structure and on screen display is
presented in a simple to use and logical GUI format.
GENUINE TRIPLEX OPERATION
The DVR will continue to record at full frame rate during
local playback, local setup, multi user remote viewing and
playback and remote setup.
BACKUP
Recorded footage (including audio) can be archived to
USB memory stick or CD.
Playback software is embedded with the backup files and
the backup also contains the system event log and backup
log for full traceability.
COMPREHENSIVE RECORDING SETUP
Recording can be scheduled, alarm activated (Option) or
motion activated. For each type of recording, frame rates,
image quality and audio recording properties can be
adjusted per hour, per day and for each individual channel.
The DVR also has a panic recording feature from the front
panel which overrides all other recording settings to
provide the best quality recording in the event of an
emergency.
TELEMETRY CONTROL
Full telemetry control is available from the front panel or
remote connection and a wide number of speed dome
protocols are supported. Protocols can be set individually