Balt 27652 Instrukcja instalacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Ładowarka Balt 27652. Balt 27652 14 stron. Odyssey 24 laptop charging cart

12.) Insert two Cams (H) into the top of the Left Side Panel (P5) and one into the top left of the Back

Panel (P7) making sure the arrow on the Cams (H) are pointed up. Press in two Wood Dowels

(J) into the top edge of the Left Side Panel (P5). Screw in three Cam Posts (I) into the bottom

left of the Top Panel (P2) as shown in Illustration # 11. Repeat these same Steps to install

Cams(H), Wood Dowels (J) and Cam Posts (I) into the Right Side Panel (P6), the Back Panel

(P7) and under the right bottom of the Top Panel (P2). Lower the Top Panel (P2) down onto the

13.)

Place the Back Lock (P) into the Center Back Panel (P10) from the outside and in. Use the Lock

Clip (Q) on the back side of the Back Lock (P) to secure it in place. Place the bottom pegs on the

Center Back Panel (P10) into the two holes in the bottom of the Back Frame (P8) and lock the

Back Lock (P) to keep the Center Back Panel (P10) in place. See Illustration # 12.

Inside View

Illustration # 12a

assembly and turn the Cams a quarter turn to lock into place.

Illustration # 11

P10

Illustration # 12