Baltech ACCESS200 Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Czytnik kart Baltech ACCESS200. Baltech ACCESS200 3 stron.

Blue

White/Brown

Brown

2. Set bus address

When using a bus protocol (e.g. OSDP), set a bus address for each reader: Place a BALTECH

AdrCard in front of the reader and wait for the signal indicating the desired address.

Note: If the readers are already configured, make sure the reader housing (i.e. the tamper

switch) is open when setting the bus address.

Learn more here:

docs.baltech.de/bus-address

or scan the QR code.

3. OPTIONAL: Test reader functionality

By default, the readers will now read any card's UID (serial number) and transmit it to the

host system. You can make use of this behavior to check if the readers are up and running:

Use a test card and configure the host system temporarily to accept this card's UID.

4. Deploy configuration

If you have a BEC file, deploy it via USB using our Windows tool BALTECH Uploader. If you

have a BALTECH ConfigCard, present it to the reader and wait for yellow and green signals.

Learn more here:

docs.baltech.de/deploy

or scan the QR code.

BALTECH AG

Phone:

Lilienthalstrass<e 27

Fax:

85399 Hallbergmoos

Mail:

Germany

Website:

+49 (811) 99 88 1-0

+49 (811) 99 88 1-11

www.baltech.de

REL_WC

J8-9

REL_NO

REL_NC

v1.0