Baltech ACCESS200 Instrukcja instalacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Kontrolery dostępu IP Baltech ACCESS200. Baltech ACCESS200 2 stron.
Również dla Baltech ACCESS200: Instrukcja instalacji (2 strony)
Drukuj stronę3. Optional: Deploy Prox license
To deploy a Prox license for HID Prox, Indala, or Keri card support, present a BALTECH LicenseCard
to each reader. Successful deployment is signaled by a yellow and green LED sequence.
Learn more:
docs.baltech.de/licensecard
4. Optional: Test reader functionality
By default, the readers will now read any card's UID (serial number) and transmit it to the host
system. You can make use of this behavior to check if the readers are up and running: Use a test
card and configure the host system temporarily to accept this card's UID.
5. Deploy configuration
BEC2 file
Deploy via the software tool "Uploader" (part of
Option
How it works
Wired
Connect the reader to your
upload
laptop via USB or RS-232.
Wireless
Connect a transfer reader to
upload
your laptop to upload the
- Beta -
configuration wirelessly via
NFC to the target reader.
Create
Load configuration onto a
ConfigCard
ConfigCard. When created,
- Beta -
present the card to each
reader. Successful
deployment is signaled by
yellow and green LED
sequence.
BEC file
Deploy via wired upload only. See description in table above.
ConfigCard
Present the ConfigCard to each reader. Successful deployment is signaled by a yellow and green
LED sequence.
Learn more:
docs.baltech.de/deploy
Beta options are not yet included in the online documentation.
6. Test configuration
Test the configured readers with a project card. The host system must be configured for live
operations.
Support
+49 811-99881-0 |
BALTECH AG
Phone:
Lilienthalstrasse 27
Fax:
85399 Hallbergmoos
Mail:
Germany
Website:
BALTECH
Requirements
Any ToolSuite version
•
ToolSuite: v.4.26.00 or above
•
Target reader: firmware 1100 v.2.00.00 or above
•
Transfer reader:
•
ID-engine ZB Brick, ISO product line (10115).
•
LEGIC readers (10117) will not work!
Position the transfer reader on top of the target
reader and align antenna centers (i.e., card
symbols on front stickers). Tolerance is 10 mm
max. in each direction.
ToolSuite: v.4.26.00 or above
•
Reader to write config to card:
•
ID-engine ZB Brick, firmware 11.23.01 or above
ConfigCard: BALTECH ConfigCard v2 or blank
•
MIFARE DESFire card (EV1 or above)
Target reader: firmware 1100 v.2.00.00 or above
•
+49 (811) 99 88 1-0
+49 (811) 99 88 1-11
www.baltech.de
ToolSuite).
v1.1
p 2/2