1 BY ONE OUK00-0351 Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Antena 1 BY ONE OUK00-0351. 1 BY ONE OUK00-0351 2 stron. Digital indoor hdtv aerial
Drukuj stronę1. Connect the Aerial on the Back of Your TV
A. Connect the aerial without the detachable ampli er
Connect the coaxial cable to the ANT/IN or CABLE IN port on the back of your TV.
Note: For TV's that require a tuner box, connect the coaxial cable to the tuner box's
ANT/IN or CABLE IN port.
Back of TV
ANT/IN
ANT/IN
CABLE IN
From Coaxial Cable
See the "Final Con guration" Illustrations Below for
Both Connection Options
1
When connected to HDTV with built in digital tuner
Digital
Aerial
HDTV
2
When connected through a digital converter box.
Digital
Aerial
Traditional TV
Digital Converter Box
B. Connect the aerial with the detachable ampli er
Powered by AC/DC Adapter or car charger
Step1. Take out the aerial main unit and accessories from box.
Step2. Connect the coaxial cable with aerial and detachable ampli er(included in
the package) (1)
Step2. Connect the ampli er and DTV set-top box or TV (2).
Step3. Connect the DTV set-top box to your TV(3) , if you have no need to use the
DTV set-top box, you can skip this step.
Step4. Connect the power adapter DC output jack (4) or the car charger (5) to the DC
input connector of the ampli er.
Digital
Aerial
1
Aerial
4
12V/50mA
Amplifier
2
5
Note
: After the installation is finished, you can use your set-top box to check the signal strength and
quality. If you can not have a steady picture, please move the aerial to a better reception position.
When you find the best position, please fix it.
Try without the amplifier, we do NOT recommend to use this amplifier if your place is very close to the
broadcast tower and the signal is already very strong. The amplifier will cause self-oscillate and you may
get fewer signals than without.
里面
Back of TV
Digital
Aerial
ANT/IN
ANT/IN
CABLE IN
1
3
TV
Back of TV
ANT/IN
ANT/IN
CABLE IN
Amplifier
2
5
4