ESE HD-206/SD Instrukcja obsługi i konserwacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Urządzenia przemysłowe ESE HD-206/SD. ESE HD-206/SD 13 stron. Hd/sd sdi time and date inserter
Drukuj stronęORANGE – The inserted characters are orange.
YELLOW – The inserted characters are yellow.
GREEN – The inserted characters are green.
BLUE – The inserted characters are blue.
VIOLET – The inserted characters are violet.
SET DAY:
01 ... 31 – Select the day.
SET MONTH:
01 ... 12 – Select the month.
SET YEAR:
00 ... 99 – Select the year.
SET MINUTE:
00 ... 59 – Select the minute. Setting the minute resets the seconds to zero. Every time the minutes
digits change, the seconds are reset to zero. The user should try and set the minutes (or hours) digits
close to the top of the minute (close to xx:xx:00). This resets the seconds to zero. The Up and Down
arrows can then be used when the RTC is shown on the LCD to fine adjust the seconds. Holding the
Up or Down buttons down while the RTC is shown will advance or decrement the seconds at a rate of
5 ms/s.
SET HOUR:
00 ... 23 – Select the hour. The hour should be set using Standard Time. The unit automatically
adjusts for Daylight Saving Time if the unit is set to adjust for DST. Every time the hours digits change,
the seconds are reset to zero. The user should try and set the hours (or minutes) digits close to the top
of the minute (close to xx:xx:00). This resets the seconds to zero. The Up and Down arrows can then
be used when the RTC is shown on the LCD to fine adjust the seconds. Holding the Up or Down
buttons down while the RTC is shown will advance or decrement the seconds at a rate of 5 ms/s.
Page 4
Revision 1.2