DivinAir Mask Fan Instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Produkt oddechowy DivinAir Mask Fan. DivinAir Mask Fan 2 stron.

Drukuj stronę

When the fan is turned on, the BLUE LED indicator will be on. The fan

can be turned on while charging.

When the battery is running low, the blue LED light will be blinking.

Before the battery is completely depleted, the blue LED light will flash

5 times to remind the user to recharge.

Light indicator

Replacing The Filter:

Power off the mask fan and make sure the

fan blade is not moving. Orient the mask

fan with the intake filter grill facing upward.

Turn the intake filter grill counterclockwise

to loosen, there should be 3 protruding

gripping points to ease with the turning.

Remove intake filter grill to expose the

Nano-Silver filter inside.

Replace the old Nano-silver filter with the

new one. Handle the filter with care to

avoid crushing and/or damaging the

coating.

With the new filter installed evenly, insert

the filter intake grill by turning clockwise to

lock it in place.

Installing Retainer Strap:

For added security, you can attach the included

retainer strap between your mask fan and the ear

loop of your facial mask. This will help prevent your

mask fan from falling if the mask fan comes loose.

Take the included retainer strap and hook the

closed loop into the mask fan.

Use the plastic C clip part to hook onto your

facial mask ear loop strap.

Specifications:

Type C Charging Port

5V 450mA

Battery Capacity

3.7V / 450mAh (1.665Wh)

Nano silver

coated filter

Charge Time

1.5 hours

Run Time

Approximately Hi = 2.3 Hr, Med = 3 Hr, Lo = 3.6 Hr

Weight

1.2 oz / 33g

Warning:

• Do not turn on the fan without the intake filter grill.

• Do not put appendages into the fan assembly whether on or off.

Customer Support:

Please visit

https://support.buydivinAir.com/

QR code (to the right) for any urgent inquiries!

Closed loop

The device complies with the European Directives 2014/30/EU.

At the end of its service life, this product may not be disposed of in the normal household waste, but rather

must be disposed of at a collection point for recycling electrical and electronic devices. The materials are

recyclable according to their labelling. You make an important contribution to protecting administration where

the appropriate disposal facility is located.

Subject to change.

or scan the