3DUpFitters 3D Printer Carbon Air Filter Instrukcja instalacji - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Drukarki 3D 3DUpFitters 3D Printer Carbon Air Filter. 3DUpFitters 3D Printer Carbon Air Filter 8 stron. Carbon air filter/vent adapter

Drukuj stronę

Carbon Air Filter

Locate Mounting Point

If you've purchased an enclosure kit from 3DUpﬁtters the mounting point will be on the

back panel when viewed from the back, as shown below.

If you're already got an enclosure or are creating one for yourself, you'll need to cut a

hole for air ﬂow, and four holes to mount the ﬁlter and fan. The hole should be 78mm

in diameter, and the holes are 70mm apart in a square pattern. There is a DXF ﬁle you

can download from the product page on the website if you want to laser or CNC your

DIY enclosure. Be sure to delete the dotted construction lines when conﬁguring

the laser or CNC control ﬁle.