3DUpFitters MMU2S Instrukcja instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Drukarki 3D 3DUpFitters MMU2S. 3DUpFitters MMU2S 11 stron.

Don't Panic If You See This!

If you can't see through the plastic, please don't
panic! What you're seeing is just the plastic or paper
protective covering. You, dear customer, are way too
smart to think the plastic is flawed and then call and
email us over and over again leaving increasingly irate
messages.
You see, when plastic sheets are manufactured they are
covered by either a paper (brown colored) or plastic
(white) covering to protect against scratches. Follow the
directions below to remove the cover and discover the beautiful plastic underneath. But if, in
some rare instance, your plastic does arrive with a crack or scratch, either from manufacturing
or in shipping, we'll of course replace it for free.
To remove the covering from an acrylic panel, lay the
panel flat on a table. Then peel up a corner of the
covering and CAREFULLY and SLOWLY pull
horizontally to the sheet to reduce the lateral forces
that would bend the acrylic. This video shows just
what to do. 

How to Remove Protective Covering from Acrylic Video
Copyright 2018 3DUPfitters
4